Table of Contents
Advertisement
8
Operation
8.1
User interface
The boot-up process starts after the device has been connected to the power supply. The boot-
up process takes approx. 10 seconds. Then the parameterized operating pages are displayed.
An exception is initial commissioning. There the identification icon is displayed, see chapter 6.1
"Allocation of devices and definition of channels" on page 17.
Fig. 29:
Overview of operation
[1] Touch-sensitive user interface
Up to 4 control elements (x4) are possible on every operating page (a total of 16; RTC occupies 2 control
elements).
[2] Display "Micro SD card inserted" (update process see chapter 7 "Update" on page 28).
[3] Display "Window open"
[4] Display "Current time"
NOTE
The primary function (1st control element of the first operating page) can be
carried out directly with a touch of the palm of the hand! This allows the main
light of the room to be switched on immediately, for example.
Product manual 2CKA001473B9085
[5] Display of available operating pages
Call-up by swiping the user interface
Operation
│29
Advertisement
Table of Contents
