Table of Contents
Advertisement
Identification via serial number
Compare the short 3-digit number of the identification label with the numbers in the list and
■
in this way identify the device you are searching for and, if necessary, also the channel..
Identification via switching
Fig. 13:
Identification via switching
Select a device and a channel from the list.
■
Press the button in the detailed view of the device.
■
–
The boot-up process of the panel starts (duration approx. 10 seconds).
NOTE
After the panel has been connected, a lamp icon is displayed on the screen prior
to initial commissioning. This can be touched for recognition. However, if the
button in the detailed view has been touched beforehand (see above), this
display is deleted on the screen and the device performs the boot-up process.
Continue until you have found the device you are looking for.
■
Product manual 2CKA001473B9085
Commissioning
│20
Advertisement
Table of Contents
