Performing The "All Reset" Procedure - Citizen A010 Manual

Handling the Watch

◆ Performing the "all reset" procedure

If the watch does not work stably, you can perform the "all reset" procedure.
* If you perform all reset, all information will be deleted. Do no perform all reset unless absolutely necessary.
* Make sure to charge the watch before performing all reset (see page 85).
1
Pull the crown out to
2
Positio .
Position
82
2
Hold down the button for 10 seconds, then release it.
• The power reserve indicator will move to indicate the fully charged status,
and the date indicator will move to indicate "1". Subsequently, the power
reserve indicator will show the current charge level, and the watch is reset.
While holding down the button with
2
a narrow-tipped object, keep your
eyes on the tip of the object.