Citizen A080 Abbreviated Instruction

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:

Component identification

Power
reserve
Indication
hand
Second
hand
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.

Checking the power reserve

You can see current power reserve amount by referring to the power reserve
indication.
Level 3
Indication
About 210 - 160
Duration
days
Power reserve is
sufficient.
Meaning
OK for normal use.
A080 Abbreviated instruction
Minute hand
Recessed button
Date
indication
Crown
Hour hand
Crown's position
0 1 2
2 1
About 160 - 100 About 100 - 3
days days
Power reserve is Power reserve is
OK. getting low.
Charge immediately.

Setting the time and calendar

Setting the time

• Do not adjust the time between 11:00 PM and 1:00 AM. Otherwise, the date
indication may change incorrectly thereafter.
1.
Pull the crown out to position
0 second.
The second hand stops.
2.
Rotate the crown to set the time.
• Change of date indication shows it just became AM. Take care the time set
is AM or PM.
• Move the hands 4 or 5 minutes forward and move them back to the right
time to set the time more precisely.
3.
Push the crown in to position
time source.
The second hand starts moving.

Setting the calendar

The calendar of this watch does not have to be adjusted manually until February
28, 2100 including leap years. (perpetual calendar)
1.
Pull the crown out to position
2.
Rotate the crown to adjust the date indication.
• Change of date indication shows it just became AM. Take care the time set
is AM or PM.
0
• Rotate the crown to move the hour hand fully for each portion of hours.
3.
Press and hold the recessed button for 2 seconds or more.
The second hand moves to indicate the current setting of the month and year.
4.
Press and release the recessed button to adjust the month and
About 3 days year.
• Each time you press the button, the hand moves by 1 step.
Insufficient
• Year and month are set by adjusting the position of the second hand.
charge warning
has started.
"Month" corresponds to one of
the 12 zones shown in the figure
below.
Each number means month.
10
9
8
7
5.
Push the crown in to position
The second hand moves to indicate the current second.
A080 instruction manual
when the second hand points
2
in accordance with a reliable
0
.
1
The year corresponds to the
years since leap year and is
indicated with the position of the
second hand.
12
11
1
2
3
4
5
6
to finish the procedure.
0
Years since leap year: 0 (Leap
year)
Years since leap year: 1
Years since leap year: 2
Years since leap year: 3
0
1
2
3