Aiwa HV-BR3000 Operating Instructions Manual page 42

1 Connect another VCR or video camera recorder to the LINE IN 2
(AUDIO INPUT and VIDEO INPUT) jacks on the front or the LINE IN
1 (AUDIO INPUT and VIDEO INPUT) jacks on the rear.
2 Press the INPUT or CH/CURSOR button on the remote controller so
that the "L2" or " L 1 " indication appears in the display window.
3 Set the connected equipment to the playback mode and this unit to
the recording mode.
42
1 Connect another VCR to the LINE OUT 1 (AUDIO OUTPUT and
VIDEO OUTPUT) jacks on the rear.
2 Select the input source on the connected VCR.
3 Set this VCR to the playback mode and the connected VCR to the
recording mode.