Figure 26. Replacing the RDX drive filler
b) Push in the clips (B) to snap the filler into the chassis
9. For a rack-mounted system, replace the air baffle (A) straight down into the chassis as shown in Figure
27 on page 30.
For a stand-alone system, replace the air baffle (A) straight into the side of the chassis as shown in
Figure 28 on page 31.
Ensure that the front flap tucks under the front chassis.
Drive backplanes for the 9009-41A, 9009-41G, 9009-42A, 9009-42G, or 9223-42H 29