IBM 9009-41A Manual page 78

Figure 58. Replacing the RDX drive filler
b) Push in the clips (B) to snap the filler into the chassis
9. Replace the air baffle. For instructions, see Replacing the air baffle (www.ibm.com/support/
knowledgecenter/POWER9/p9haj/p9haj_914_924_airbafflereplace.htm).
Preparing the 9009-41A, 9009-41G, 9009-42A, 9009-42G, or 9223-42H system for
operation after removing and replacing the 12-drive expanded function disk drive
backplane
To prepare the system for operation after removing and replacing the 12-drive expanded function disk
drive backplane, complete the steps in this procedure.
Procedure
1. Replace the service access cover.
For a rack-mounted system, complete the following steps. Refer to Figure 59 on page 65.
a. Slide the cover (A) onto the system unit.
b. Close the release latch (B) by pushing it in the direction shown.
64 Power Systems: Power Systems: Drive backplanes