Reconnecting The "Y" Sas Cable In A Storage Controller Configuration - IBM Power System 5105-22E Manual

Figure 29. Reconnecting the "Y" SAS cable in a high-performance storage controller configuration
For information about SAS cable part numbers, see 5105-22E, 9008-22L, 9009-22A, 9009-22G, or
9223-22H system parts (http://www.ibm.com/support/knowledgecenter/POWER9/p9ecs/
p9ecs_922_parts.htm).
6. Seat all the front drives and front fillers if present into their slots as shown in Figure 30 on page 31.
Push drive lever (A) until the drive and filler is seated and the lever snaps closed.
30 Power Systems: Power Systems: Drive backplane