Advertisement
R
G
EMOVING THE
S
P
YSTEM AND
ULLEYS
Step 21
•
Grab the front part of the guillotine
guide rail system on the left and move
it up by about 6".
3
•
Using the
/
" Allen Key, remove the
16
cylindrical screw at the bottom of the
rail.
•
While holding the front part of the
guide rail system, move the middle
part of the guide rail system to align
the holes with the screws behind.
5
•
Using the
/
" Allen key, unscrew the
32
four screws holding the back part of the
guide rail system to the facing of the
fireplace. They will not come through
the guide rail, so unscrew a little bit of
every screw in order to be able to pull
forward
the
guide
gradually. The guide rail system will
not come free just yet.
R
UIDE
AIL
rail
system
Step 22
•
Using a small ratchet with a
7
or a
/
" wrench, remove the four nuts
16
holding the pulley support in place at
the very top of the left guide rail
system.
•
Pull the pulley support forward to
disengage the screws slowly. The guide
rail system is attached to the pulley
support.
•
Twist the whole assembly to be able to
bring the pulley support down and out
of the guillotine bay.
•
Remove the guide rail system from the
pulley support.
You can stop here if you want to
change a counterweight cable.
7
/
" socket
16
13
Advertisement
