Step 19
•
Remove all four nuts on the left side.
•
While holding the stainless steel gasket
at the top, pull the left side of the
guillotine frame forward and remove it.
Be careful not to damage the stainless
steel
gasket
guillotine frame, it is very fragile.
You can stop here if you only want to
change
the
located at the top of the guillotine
frame.
12
located
behind
stainless
steel
gasket
R
EMOVING THE
C
OUNTERWEIGHTS
Step 20
•
Grab a hold of one of the cables
attached to the counterweights, lift it
the
slightly. Wear gloves to prevent getting
cut by the cable.
•
Grab the bottom of the counterweight
and pull it out of its channel while you
lower it with the cable.
3
•
Using a
/
" wrench or a Vise-Grip type
8
wrench, open the threaded connector
and remove the cable.
•
Do
the
counterweight.
G
UILLOTINE
same
for
the
other