Related Manuals for Renaissance Fireplaces LINEAR 50 SP
Summary of Contents for Renaissance Fireplaces LINEAR 50 SP
- Page 1 RENAISSANCE LINEAR 50 SP Keep these instructions for future use. RL50SP-OW – 2017-08...
- Page 2 The Renaissance LINEAR 50 SP is a member of the Renaissance Fireplaces family of ultra-high-end fireplaces. The LINEAR 50 SP is unique in its design. The 50" wide opening provides an enormous linear space to watch the fire. It combines technology with elegance, allowing you to enjoy an open fire in a modern fashion.
-
Page 3: Table Of Contents
TABLE OF CONTENTS GETTING STARTED: WHAT TO KNOW AND DO BEFORE THE FIRST FIRING MPORTANT AFETY AND PERATION RECAUTIONS Do's and Don'ts Avoiding Excessive Temperatures EATURES Unique Decorative Fireplace Options ROPER What to Burn at All Times ... -
Page 4: Getting Started: What To Know And Do Before The First Firing
GETTING STARTED: WHAT TO KNOW AND DO BEFORE THE FIRST FIRING GETTING STARTED: WHAT TO KNOW AND DO BEFORE THE FIRST FIRING IMPORTANT SAFETY AND OPERATION PRECAUTIONS S AND If this fireplace is not properly installed, a house fire could result. For your safety the fireplace should be installed by a professional following the installation directions. -
Page 5: Avoiding Excessive Temperatures
THIS WOOD LOAD IS MORE THAN SUFFICIENT TO FILL THE FIREBOX COMPLETELY WITH FLAMES AND PROVIDE A LARGE AMOUNT OF RADIANT HEAT. THE RENAISSANCE LINEAR 50 SP WILL BURN WITH LARGE HIGH FLAMES REGARDLESS OF HOW THE WOOD IS PLACED IN THE UNIT. STACKING THE WOOD TIPI-STYLE AGAINST THE BACK OF THE FIREPLACE IS ACCEPTABLE BUT CAN COSMETICALLY DAMAGE THE FIREBOX REFRACTORY BRICKS IF YOU’RE NOT CAREFUL PLACING THE LOGS. -
Page 6: Features
IREPLACE The LINEAR 50 SP fireplace is a decorative fireplace that provides a magnificent view of the fire. It is defined as a fireplace (primarily for aesthetics) under the 2015 EPA (United States Environmental Protection Agency) regulation since it offers more than 500 square inches of pure fire viewing (682 square inches are visible). -
Page 7: Proper Fuel
It’s true of all combustion appliances: the better the fuel, the better the burn. Let’s look now at the characteristics of good fuel, so that you have the right information to provide your LINEAR 50 SP with the fuel that will make for easier and faster starting, cleaner and more beautiful burning, and reduced maintenance. -
Page 8: First Fires
UTSIDE ONTROL The LINEAR 50 SP is designed to use outside air for combustion. The control for the outside air is located inside the firebox, in front of the left ash step refractory brick (see Figure 3). Since it is inside the firebox, we recommend that you open the outside air before lighting a fire, and wait until the firebox cools down to close it. -
Page 9: Chimney Damper
HIMNEY AMPER The LINEAR 50 SP is equipped with a chimney damper that is located in the flue at the top of the fireplace. This chimney damper should only be used in either fully open or fully closed position. The chain for the chimney damper is inside the firebox at the front, just above the opening. -
Page 10: Controlling The Fire
CONTROLLING THE FIRE The LINEAR 50 SP fireplace is designed to provide warm radiant heat. Although it does not come with a draft control, you will find that you can control the intensity of the fire and the quantity of flames quite well by varying the size and placement of the logs. -
Page 11: Maintenance
AINT You can touch up the metal areas of the face of the LINEAR 50 SP with Stove Bright Metallic Black high temperature paint which is available at most fireplace dealers. Follow the directions outlined on the spray can. DO NOT attempt to paint the fireplace while it is still warm. Keep the spray can away from any source of heat or open flame. -
Page 12: Gaskets
Latch Plate Adjustment A fireplace as clean burning as the LINEAR 50 SP does not produce a lot of creosote, but the chimney should nevertheless be inspected for creosote buildup after a couple of months of using it. This will allow you to visualize the amount... -
Page 13: Replacement Parts
At least an annual inspection is recommended. A buildup of ¼" or more calls for cleaning by a chimney professional. Depending on how you burn your LINEAR 50 SP, the chimney may need cleaning every year or every other year. -
Page 14: Warranty
Renaissance Fireplaces™ will also pay reasonable labor costs for the repair work. During the second through fifth years Renaissance Fireplaces™ will repair or replace, at our option, any parts which upon examination by an authorized Renaissance Fireplaces™ representative, are found to be defective, except the parts listed in the EXCLUSIONS portion of this warranty. - Page 15 Renaissance Fireplaces™ is free of liability for any damages caused by the appliance, as well as material and labor charges incurred in the removal or re-installation of any Renaissance Fireplaces™ fireplace under this warranty. Incidental or consequential damages are not covered by this warranty.
Need help?
Do you have a question about the LINEAR 50 SP and is the answer not in the manual?
Questions and answers