Table of Contents
Advertisement
7. CLOCK FUNCTIONS
7.1 Clock functions
Clock function
Time of Day
End Time
Time Delay
Minute Minder
7.2 How to set: Clock functions
How to change: Time of Day
- flashes when you connect the oven to the electrical supply, when there was a
power cut or when the timer is not set.
Step 1
Step 2
How to set: Duration
Step 1
Step 2
Step 3
Step 4
Step 5
Duration
- press repeatedly.
,
- press to set the time.
After approximately 5 sec., the flashing stops and the display shows the
time.
Set an oven function and the temperature.
- press repeatedly.
,
- press to set the duration.
The display shows:
- flashes when the set time ends. The signal sounds and the oven
turns off.
Press any button to stop the signal.
Turn the knob for the oven functions and the knob for the temperature to
the off position.
Application
To set, change or check the time of day.
Only the top oven works without the set time.
To set how long the oven works.
The function works only for the main oven.
To set when the oven turns off.
The function works only for the main oven.
To combine functions: Duration and End Time.
The function works only for the main oven.
To set a countdown. This function has no effect on the
operation of the oven. You can set this function at any
time, also when the oven is off.
- starts to flash.
- starts to flash.
.
ENGLISH
11
Advertisement
Table of Contents
