Swiveling The Armrests; Swiveling The Footrests; Removing/Fitting A Heel Strap; Removing/Fitting The Seat Plate - Invacare Aquatec Ocean User Manual

Shower and Toilet Commode Ocean / Ocean XL

5.2 Swiveling the armrests

CAUTION Risk of getting fingers caught in the flap

mechanism
▸ Do not grip the joint when folding the armrests up or
down.
▸ Make sure that no parts are caught in the mechanism.
▸ Do not grip between the armrest and the backrests when
folding up.

5.3 Swiveling the footrests

Entry position/exit position:
1. Pull the footrest in the guide
A
groove no longer engages in the pin of the clip D.
C
2. Swivel the footrest to the side.
Driving position:
CAUTION Risk of accident due to loose footrest

▸ Fix footrests in the driving position.
1. Turn the footrest inwards.
A
12
a little upwards, until the
B
2. Push the footrest downward, until the groove
of the clip D.

5.4 Removing/fitting a heel strap

1. Open the Velcro®strip
E
2. Remove the screw from the underside of the footplate.
F
3. Remove the heel strap from the flexible plastic pin.
Attach the strap using the same procedure in the reverse order.
!
IMPORTANT
When installing ensure that the Velcro®strip of the heel strap
is facing backwards.

5.5 Removing/fitting the seat plate

Removing:
1. Pull the seat plate upwards on both sides.
Fitting:
CAUTION Risk of getting fingers caught

▸ Do not insert fingers between the seat surface and the seat
frame when pressing down on the seat plate.
1. Place the seat plate on the seat frame with the cutout to the front.
2. Push the seat plate backwards as far as it will go.
3. With your hand flat, press the seat plate down at the sides and then
at the front and back until the seat plate snaps into the seat frame.
6

Transport

6.1 Safety information

The product can be dismantled for transport into the parts of
i
the scope of delivery (Section 3.1 Components).
▸ Disassemble the product, see Section 4 „Assembly and
installation".
engages in the pin
C
on the heel strap.
Transport