Invacare Aquatec Ocean User Manual page 9

Assembly and installation
Adjusting the height of the armrests
!
IMPORTANT
▸ Adjust the height of the armrests to suit the user.
▸ Change the height of the armrests evenly on both sides.
▸ Set the height of the right and left armrest in the exact same
manner.
1. On the backrest cover, open the buckle of the belt that passes on
the inside of the backrest frame.
2. On the backrest cover, open the buckle of the belt
above the armrest.
3. Pass this belt on the inside of the backrest frame and reclose.
The nuts are inserted loosely in the retaining clamp and can
i
fall out.
4. Unscrew the screws of the armrest bracket
B
key supplied.
5. Remove the securing clamp
backrest frame.
that runs
C
using the Allen
A
with the nuts from the inside of the
D
Shower and Toilett Commode Ocean / Ocean XL
6. Remove the backrest bracket
upwards.
The smaller hole serves to fix the retaining clamp.
i
7. Insert the screws in the armrest bracket and guide them through
the holes in the backrest frame.
8. If required, put the nuts back into the retaining clamp.
9. Place the retaining clamp on the backrest frame so that the fixing on
the retaining clamp projects into the smaller hole.
10. Turn the screws in the nuts and tighten.
11. Pass the belt of the backrest cover that is still open on the outside
of the backrest frame, close and tighten all belts.
!
IMPORTANT
The armrests are lowered using the same procedure.
▸ When converting to the lower position, the belt that lies
beneath the armrest must be opened and passed inside the
backrest frame.
with the armrest and move it
A
9