Page 1 SteamRock II Premium SteamRock II Premium NC Steam generator for steam rooms Operating Instructions Made in Germany Druck-Nr.: 2902 5126 Stand: 01/2020...
Page 2: Documentation
+49 2775 82-431 www.eos-sauna.com Original installation and operating instructions EN Copyright for these operating instructions remains with EOS Saunatechnik GmbH. Copyright as per DIN ISO 16016: The copying and distribution of this document, as well as the use and com- munication of its contents without express authorisation, are not permit- ted.
Page 3: Table Of Contents
Switching ECO mode on/off ..............39 Advanced settings ..................40 4.6.1 Language selection..............45 4.6.2 Screen saver ...................46 4.6.3 Standby mode................47 4.6.4 Operational lock/child lock ............48 4.6.5 Display brightness................50 4.6.6 Holiday cottage mode ...............51 4.6.7 Operating data ................53 SteamRock II Premium - Operating Instructions...
Page 4 6 Cleaning and servicing..................96 Refilling descaler and essence ..............96 Descaling......................97 Regular maintenance.................. 98 Resetting the safety temperature limiter ..........100 Troubleshooting..................102 7 General terms and conditions of service ..........104 8 Disposal ........................107 Operating Instructions - SteamRock II Premium...
Page 5: General Safety Instructions
CAUTION Caution Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE Notice Indicates a hazardous situation which, if not avoided, will result in damage to the unit. SteamRock II Premium - Operating Instructions...
Page 6: Installation And Maintenance
Corrosive or heavy saline atmospheres damage the contacts in the control unit, in the relay box and in the sensors.  The control unit and sensors should not be installed in a corro- sive or heavy saline atmosphere. Operating Instructions - SteamRock II Premium...
Page 7: Operating The Sauna And Steam Room
 The steam generator must be supervised at all times if it does not turn itself off.  Inspect the steam room each time you start the system. SteamRock II Premium - Operating Instructions...
Page 8: Operator Instruction
 Children and persons who have not received proper instruction must not clean or service the system. Operating Instructions - SteamRock II Premium...
Page 9: Standards And Regulations
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission DIN EN 55014-2 Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 2: Immunity SteamRock II Premium - Operating Instructions...
Page 10: Identification
E Country of origin B Model F Manufacturer C Item number G Manufacturing date D Operating voltage (depending on H Serial number the model)  Nameplate for control panel for SteamRock Premium (example: 12–18 kW) Operating Instructions - SteamRock II Premium...
Page 11: Intended Use
The SteamRock II Premium is operated via the EmoTouch 3 control panel, which is included in the scope of delivery. The SteamRock II Premium NC is used in a multi-cabin installation and con- trolled by the existing control unit. EmoTouch 3 control panel The EmoTouch 3 control panel is suitable for private and commercial use to control steam rooms and sauna cabins.
Page 12: Water Hardness
 The unit is operated by children or persons with reduced mental capac- ity or by persons who have not been thoroughly instructed in its use.  General safety instructions,  5 For more information, see the SteamRock II Premium installation instructions. Water hardness...
Page 13 0.14241 French degree 1 °f = 0.56029 0.70157 Russian degree 1 °rH = 0.140 0.176 0.251 0.146 0.025 CaCO (USA) 1 ppm = 0.056 0.07 0.01 mMol/l 1 mMol/l = 5.6077 7.0218 10.009 100.09 SteamRock II Premium - Operating Instructions...
Page 14: Description Of The Control Panel
F Fan 2 Essence container 2, level indicator above container 1 ----- Optional J Add-on modules  Example – connection diagram for steam room The add-on modules are set for each cabin and controlled individually. Operating Instructions - SteamRock II Premium...
Page 15: Scope Of Delivery
Description of the control panel Scope of delivery In addition to the SteamRock II Premium vaporiser, the scope of delivery also includes the following: A 5 l descaler container with level sensor G 2 brass injection nozzles for essence B 0.5 m connecting hose for 3/8"–3/4" water connection H 5 m connecting hose from control panel to steam C 2 piece 1 1/4"...
Page 16: Overview Of Control Panel
The connecting cables are routed through the back of the housing to the cir- cuit board. The housing for mounting in the wall is included in the scope of delivery. Operating Instructions - SteamRock II Premium...
Page 17: Control Panel Circuit Board
A Round cell battery CR2032 3V D RJ10 jacks for cabin connections 1–8 B Reset button (green LED) E Mounting plate C Memory card connection (type A jack) F Power adaptor connection  EmoTouch 3 circuit board SteamRock II Premium - Operating Instructions...
Page 18: Technical Data
Description of the control panel Technical data 3.3.1 SteamRock II Premium / SteamRock II Premium NC Dimensions (W x H x D) 670 x 460 x 350 mm Weight 28 kg (type 1 – 9 kW) / 30 kg (type 2 – 18 kW) Max.
Page 19: Emotouch 3
1 x connection for memory card (input/host, jack type A) Connection for power adapter 24 V DC Power supply Via steam generator. Connection for power adapter 24 V DC for 25 m or more of cable Error display Text on the display SteamRock II Premium - Operating Instructions...
Page 20: Operation
Unit operation and unit settings are available on different lev- els: Operation Private operation level Commercial opera- Basic settings (per cabin) tion Advanced settings (with PIN code) Service level Settings for service technician (with PIN code) Operating Instructions - SteamRock II Premium...
Page 21: User Interface
Texts are displayed in the following colours:  White: Status texts, e.g. date, name of sub-menu  Blue: active input digits, e.g. for date, time, timer display  Red: Warning, time display for auto-stop SteamRock II Premium - Operating Instructions...
Page 22: Configuration Upon Commissioning Or After A Reset
 Defining the user interface language Tap the desired language. Setting Language 01. June 2019 08:44:40 Tap the language again to confirm the selection.  Once confirmed, the display moves to the next setting. Operating Instructions - SteamRock II Premium...
Page 23: Setting The Time
Set the minutes and confirm.  Setting the date Set the day, month, and year by pressing , and then con- firm. Setting Date 01.06.2018 01. June 2018 08:42:40  The active place value appears in blue. SteamRock II Premium - Operating Instructions...
Page 24  European Union/CENELEC must be selected if the system is installed in countries under the jurisdiction of the CENELEC.  Once EU/CENELEC is selected, specific provisions of the EU/CENELEC apply, e.g. the time limit for operation. Operating Instructions - SteamRock II Premium...
Page 25 Choose this setting if only 2 cabins are operated for which 2–4 steam generators each are installed. Additional cabins require their own control unit.  Choose this setting if only 2 cabins are operated for which 1–2 steam generators each are installed. Confirm the selection. SteamRock II Premium - Operating Instructions...
Page 26: Defining The Type Of Use
Setting Usage private use 01. Juni 2018 08:45:40 Private use Commercial use  Specific safety regulations apply to this setting. See 1.4 Operator instruction,  8 Confirm the selection by pressing Operating Instructions - SteamRock II Premium...
Page 27  You must follow the procedure described here to select the skin. It cannot be changed later. SteamRock II Premium - Operating Instructions...
Page 28 Do you want to choose skins? 01. June 2018 08:51:40 Skin selection is cancelled. The standard cabin image is displayed. The screen for selecting the connected module is displayed again. Skin selection is displayed. Confirm the selection. Operating Instructions - SteamRock II Premium...
Page 29: Cabin Settings For Steam Rooms
 Sub-menus close automatically if the display is not touched for 10 seconds. After that, the start screen is displayed.  If you have a multi-cabin installation, you can switch to the start screen by tapping the cabin number in the status bar. SteamRock II Premium - Operating Instructions...
Page 30: Switching Steam Generation On/Off
 Setting the automatic start time,  57  Setting a one-time heating period,  59  Switching the system on Tap and hold for 3 seconds. 01. June 2019 18:45:40  Steam supply starts. Operating Instructions - SteamRock II Premium...
Page 31 11. June 2018 18:46:40  The cloud of steam indicates that steam supply is turned on. Steam supply always starts delayed, because SteamRock II Premium first performs a quick self-test to ensure correct filling and then fills with water. A few minutes may pass before steam begins to fill the cabin.
Page 32: Setting Essence Supply
Essence dosing, see service settings, 5.1.11 Essence dosing,  86  Selecting the essence pump Press and hold the steam emitter icon for 3 seconds. 01. June 2019 18:45:40  The menu with the current setting appears. Operating Instructions - SteamRock II Premium...
Page 33  The essence is supplied by the corresponding pump.  Shutting of essence supply Press and hold the steam emitter icon for 3 seconds. 01. June 2019 18:45:40  The menu with the current setting appears. SteamRock II Premium - Operating Instructions...
Page 34: Setting The Temperature
You can also set the temperature while the system is in operation.  Setting the cabin temperature Press and hold the steam emitter icon for 3 seconds. 01. June 2019 18:45:40  The menu with the current setting appears. Operating Instructions - SteamRock II Premium...
Page 35: Dimming Or Switching The Light On/Off
 The lighting must conform to protection class IP65 and be re- sistant to ambient temperatures.  Connect only dimmable light sources.  Switching the lighting on/off,  36  Dimming the light,  36 SteamRock II Premium - Operating Instructions...
Page 36  The light is switched on or off, depending on its current state.  Dimming the light Press and hold the light icon for 3 seconds. 01. June 2019 18:45:40  The menu with the current setting appears. Operating Instructions - SteamRock II Premium...
Page 37: Retrieving Temperature Values
You can retrieve the current (actual) and set (target) temperature at all times.  Retrieving temperature information Tap the temperature icon. 01. June 2019 18:45:40  The actual and target values from the connected sensors are displayed for approx. 20 seconds. SteamRock II Premium - Operating Instructions...
Page 38: Switching Potential-Free Contact On/Off
Off: Switch position down b) On: Switch position up  If the icon for potential-free contact is not displayed, contact your retailer or installation technician.  See 5.1.6 Setting the potential-free contact,  79 Operating Instructions - SteamRock II Premium...
Page 39: Switching Eco Mode On/Off
 Activating ECO mode in the main menu Tap the icon for steam emission. Settings deactivate tap briefly 01. June 2019 5:58:21 12:45:40  Cancelling ECO mode from the main menu Tap the icon for steam emission. SteamRock II Premium - Operating Instructions...
Page 40: Advanced Settings
 Cabin settings (commercial multi-cabin installation),  General settings for all cabins Select cabin overview Select cabin overview  General settings (private multi-cabin installation),  42 Enter code 5645  General settings (commercial multi-cabin installation),  42 Operating Instructions - SteamRock II Premium...
Page 41 If multiple cabins are in use, you can define advanced settings for all cabins as a group. The following settings are defined for one cabin and apply to all.  Type of use: commercial/private  Language SteamRock II Premium - Operating Instructions...
Page 42 General settings 05. June 2018 08:15:42  General settings (private multi-cabin installation) Settings ipsum General settings 05. June 2018 08:15:42  General settings (commercial multi-cabin installation) Advanced settings are also available for each cabin. Operating Instructions - SteamRock II Premium...
Page 43 Operation Settings Cabin settings 01. June 2019 12:45:40  Cabin settings (private multi-cabin installation) Settings Cabin settings 05. June 2018 08:15:42  Cabin settings (commercial multi-cabin installation) SteamRock II Premium - Operating Instructions...
Page 44  Setting the period for the first recurring heating period,  63 Coloured light module coupling,  Coupling the coloured light to the heating,  70 ECO runtime  Activating ECO mode in the main menu,  39 Operating Instructions - SteamRock II Premium...
Page 45: Language Selection
Tap the desired language. Setting Language 01. June 2019 08:15:40  The sub-menu closes. Texts on the display appear in the new language.  With multi-cabin installations, the new language is adopted for all cabins. SteamRock II Premium - Operating Instructions...
Page 46: Screen Saver
Press to set the time in hours. Setting Screen saver 1:00 01. June 2019 12:45:40  The active place value appears in blue. and confirm the selection. Press to set the time in minutes. Operating Instructions - SteamRock II Premium...
Page 47: Standby Mode
Tap on the display to end standby mode. Steam supply always starts delayed, because SteamRock II Premium first performs a quick self-test to ensure correct filling and then fills with water. A few minutes may pass before steam begins to fill the cabin. Individual factors may also factor into the delay, e.g.
Page 48: Operational Lock/Child Lock
The control unit cannot be used if the PIN is not known.  Save the PIN in a safe place.  Contact your retailer or EOS Service if you lose your PIN.  Entering the PIN for the operational lock/child lock and activating it Open the advanced settings.
Page 49  Deactivating the operational lock/child lock : Select and confirm. : Select and confirm. Enter the PIN and confirm.  The display switches to the standby screen. All functions are available again. SteamRock II Premium - Operating Instructions...
Page 50: Display Brightness
 See 4.6 Advanced settings,  40 and confirm the selection. Settings 01. June 2019 12:45:40 Move the slider to the desired light intensity in %. Settings Display brightness 01. June 2019 12:45:40  The brightness is adjusted immediately. Operating Instructions - SteamRock II Premium...
Page 51: Holiday Cottage Mode
No access to the control unit The control unit cannot be used if the PIN is not known.  Save the PIN in a safe place.  Contact your retailer or EOS Service if you lose your PIN. SteamRock II Premium - Operating Instructions...
Page 52: Entering The Pin For Holiday Cottage Mode And Activating It
 Deactivating holiday cottage mode Open the advanced settings.  See 4.6 Advanced settings,  40 Enter the PIN and confirm.  The display switches to the standby screen. All functions are available again. Operating Instructions - SteamRock II Premium...
Page 53: Operating Data
Settings 01. June 2019 12:45:40 and confirm the selection. Settings Operation data Firmware version 01. June 2019 12:45:40  The current status of each module is displayed. The serial number is displayed, e.g. 021000182. SteamRock II Premium - Operating Instructions...
Page 54  The time in hours that remains until the next servicing is displayed. The following values are set for the service intervals by the factory:  Private use: 500 hours  Commercial use: 2500 hours Operating Instructions - SteamRock II Premium...
Page 55: Heating Period - Auto Stop
Please observe the local statutory intermission times.  Setting auto-stop for the heating period Open the advanced settings.  See 4.6 Advanced settings,  40 and confirm the selection. Settings 01. June 2019 12:45:40 SteamRock II Premium - Operating Instructions...
Page 56: Automatic Start Time
This function allows you to set the automatic start time up to 24 hours in advance.  Selecting the operating mode,  25  Setting the automatic start time,  57  Deleting timer settings,  58 Operating Instructions - SteamRock II Premium...
Page 57 Operation  Setting the automatic start time Open the advanced settings.  See 4.6 Advanced settings,  40 and confirm the selection. Settings 01. June 2019 12:45:40 Setting Timer Auto-Start 01. June 2019 12:45:40 SteamRock II Premium - Operating Instructions...
Page 58: One-Time Heating Period
 Setting auto-stop for the heating period,  55. You can also set recurring heating periods for each cabin if the system is used commercially.  Selecting the operating mode,  25  Setting a one-time heating period,  59 Operating Instructions - SteamRock II Premium...
Page 59  Setting a one-time heating period Open the advanced settings.  See 4.6 Advanced settings,  40 and confirm the selection. Settings 01. June 2019 12:45:40 and confirm the selection. Setting Timer single event 01. June 2019 12:45:40 SteamRock II Premium - Operating Instructions...
Page 60 Setting single event Date 25.06.2019 01. June 2019 12:45:40  The active place value appears in blue. and confirm the selection.  The date is saved and the sub-menu for the temperature is shown. Operating Instructions - SteamRock II Premium...
Page 61  With multi-cabin installations, the timer symbol on the cabin image are displayed in blue.  The heating duration corresponds to the time set for auto stop; see  Setting auto-stop for the heating period,  55. SteamRock II Premium - Operating Instructions...
Page 62: Recurring Heating Periods
The programmed cycle time is not permitted, the timer does not start. Possible causes: Heating time limitation is exceeded or the required intermission time is not observed. Defined recurring heating periods are displayed as follows: Settings series event 05. June 2018 08:15:42 Operating Instructions - SteamRock II Premium...
Page 63: Setting The Period For The First Recurring Heating Period
Open the advanced settings.  See 4.6 Advanced settings,  40  In the multi-cabin installation, open the advanced settings for one cabin. and confirm the selection. Settings Cabin settings 05. June 2018 08:15:42 SteamRock II Premium - Operating Instructions...
Page 64 05. June 2018 08:15:42 Tap the day of the week and confirm the selection. Setting series event Monday 05. June 2018 08:14:42  A series of four periods is possible per day of the week. Operating Instructions - SteamRock II Premium...
Page 65  Enter the start time and end time for each heating period. Set the start time with , and then confirm by pressing Setting series event monday start time : 00 05. June 2018 08:16:12  The active place value appears in blue. SteamRock II Premium - Operating Instructions...
Page 66 Setting series event monday End time : 00 05. June 2018 08:16:52 Set the desired temperature with the slider. Setting temperature 05. June 2018 08:16:52  This sets the first period of the series. Operating Instructions - SteamRock II Premium...
Page 67 Tap the heating period number and confirm the selection. Set the start time to --:-- and confirm the setting.  This deletes the specific heating period for the current series. All other defined heating periods remain set. SteamRock II Premium - Operating Instructions...
Page 68  In the multi-cabin installation, open the advanced settings for one cabin. and confirm the selection. Settings Cabin settings 05. June 2018 08:15:42 and confirm the selection. Settings Timer series event 05. June 2018 08:15:42 Operating Instructions - SteamRock II Premium...
Page 69 Setting series event 05. June 2018 08:15:48 Setting delete all series events? 05. June 2018 08:15:42 Confirm the prompt with  All series with all defined heating periods are deleted. SteamRock II Premium - Operating Instructions...
Page 70: Coloured Light Coupling
 See 4.6 Advanced settings,  40 and confirm the selection. Settings 01. June 2019 12:45:40 and confirm the selection. Setting colrd. light coupling heater/colrd. light 01. June 2019 12:45:40  The coloured light is coupled to the heating. Operating Instructions - SteamRock II Premium...
Page 71  See 4.6 Advanced settings,  40 and confirm the selection. Settings 01. June 2019 12:45:40 and confirm the selection. Setting colrd. light coupling heater/colrd. light 01. June 2019 12:45:40  Coloured light and heating are not coupled. SteamRock II Premium - Operating Instructions...
Page 72: Error Messages
Power unit is connected to the wrong Check the cabin address and connection in jack in the control panel the control panel. Multiple power units are programmed Check the cabin addresses. Refer to the with the same address. installation instructions. Operating Instructions - SteamRock II Premium...
Page 73: Service Settings
Access to the service level is protected by a code. The settings at this level must only be changed by trained personnel. Settings 18. June 2018 08:45:49  Advanced settings – steam room example SteamRock II Premium - Operating Instructions...
Page 74  Adjusting the temperature and hysteresis,  87 Floor heating  Adjusting the temperature and hysteresis,  88  Setting the ECO function runtime,  89 Home  Making communication settings for the building management system,  90 Operating Instructions - SteamRock II Premium...
Page 75: Opening Service Settings
3 seconds. Enter code 5349 and confirm. Setting Code - - - - - - - - 01. June 2018 08:41:40 Settings 18. June 2018 08:45:49  Advanced settings (example) Tap the desired icon. SteamRock II Premium - Operating Instructions...
Page 76: Service/Maintenance
 When it is time for service again, a reminder with the saved contact data is displayed when the unit starts.  For information about the amount of time remaining before service is required again, see  Retrieving the next service date,  54. Operating Instructions - SteamRock II Premium...
Page 77: Switching Hysteresis
Set the value with , and then confirm by pressing Setting Switch. hysteresis 27. June 2018 09:16:42  The value can be set to any number between 1 and 5. SteamRock II Premium - Operating Instructions...
Page 78: Reset Function
Cabin: Reset only the settings for the current cabin. b) All settings: All settings for all cabins are reset.  If you reset the settings, the control panel restarts and the cabin settings must be reset. Operating Instructions - SteamRock II Premium...
Page 79: Temperature Control
For example, you can have additional cabin lighting switch on once the set cabin temperature (target) has been reached. Observe the installation instructions and documentation for the device when retrofitting an additional device. SteamRock II Premium - Operating Instructions...
Page 80 The supply line can short circuit if you use the mains connections L1, L2 or L3 to supply the electric circuit connected to the poten- tial-free contact.  Use the SteamRock II Premium mains connections only for the steam generator.  Do not connect additional devices to the SteamRock II Premium mains connections.
Page 81: Setting The Potential-Free Contact
 The icons for the BiO sauna and for the sauna with humidity mode do not apply to steam rooms. Choose the icon that should be assigned to the potential-free contact.  The icon on the cabin image is displayed only with manual switching. SteamRock II Premium - Operating Instructions...
Page 82: Fan
 The white icon indicates that the function is active. The grey icon indicates that the function is not assigned. 5.1.8 Post-cycle period for fan(s) Once steam supply has ended, the cabin can be optimally dried by having a fan run post-cycle. Operating Instructions - SteamRock II Premium...
Page 83: Setting The Post-Cycle Period For Drying The Cabin
 The value can be set to any number between 0 and 60 minutes. The interval is set to 30 minutes by the factory.  Verify that post-cycle has been assigned to a fan; see 5.1.7 Fan,  82. SteamRock II Premium - Operating Instructions...
Page 84: Draining Water
Open the service settings.  See 5.1.1 Opening service settings,  75 and confirm the selection. Start draining the water by pressing Setting Drain Water 27. June 2018 12:19:49  Draining is ended automatically. Operating Instructions - SteamRock II Premium...
Page 85: Descaling
 See 5.1.1 Opening service settings,  75 and confirm the selection. Start descaling by pressing Setting Start Descaling 27. June 2018 12:59:49  The status bar displays an icon to indicate that descaling is in progress. SteamRock II Premium - Operating Instructions...
Page 86: Essence Dosing
 The dosing duration for both dosing pumps can be set to different values. Slide the dosing duration slide to the desired value.  The dosing interval for both dosing pumps can be set to different values. Operating Instructions - SteamRock II Premium...
Page 87: Bench Heating
Open the service settings.  See 5.1.1 Opening service settings,  75 and confirm the selection. to set the hysteresis value. Setting Hysteresis Temperature 27. June 2018 16:16:42 Slide the temperature slider to the desired value. SteamRock II Premium - Operating Instructions...
Page 88: Floor Heating
Open the service settings.  See 5.1.1 Opening service settings,  75 and confirm the selection. to set the hysteresis value. Setting Hysteresis Temperature 27. June 2018 16:16:42 Slide the temperature slider to the desired value. Operating Instructions - SteamRock II Premium...
Page 89: Eco Runtime
See 4.5 Switching ECO mode on/off,  39  If the setting is 0 minutes, you must manually switch the ECO runtime on or off in the main menu or by pressing a button. SteamRock II Premium - Operating Instructions...
Page 90: Home Function
 You are not required to set any additional values if you select KNX as the transfer protocol. Follow the steps below for the Modbus protocol.  Applicable settings for the Modbus protocol can be found in the documentation for the application in use. Operating Instructions - SteamRock II Premium...
Page 91: Updating Firmware
 Do not scratch the display glass with the tools.  Preparing the update,  92  Dismantling the control panel,  92  Installing the update,  93  Rebooting after a malfunction when updating,  95 SteamRock II Premium - Operating Instructions...
Page 92 Service settings  Preparing the update Download the most recent firmware from the EOS website.  eos-sauna.com/service-support/software Unzip the ZIP file and transfer it to the memory card.  Dismantling the control panel NOTICE Do not lay removal tools directly on the glass.
Page 93 Plug in the memory card. Open the service settings.  See 5.1.1 Opening service settings,  75 Setting Code - - - - - - - - 01. June 2018 08:41:40 Enter code 543210. SteamRock II Premium - Operating Instructions...
Page 94  Rebooting after a malfunction when updating,  Remove the memory card after the update. Place the control panel directly in front of the bottom piece.  Ensure that it is aligned properly. Socket 1 must face downward. Operating Instructions - SteamRock II Premium...
Page 95 Press the display carefully with a consistent amount of pressure into the housing until it audibly snaps into place.  Rebooting after a malfunction when updating Press the Reset button.  The control panel restarts. Repeat the update. SteamRock II Premium - Operating Instructions...
Page 96: Cleaning And Servicing
Cleaning and servicing Cleaning and servicing The SteamRock II Premium steam generator must be serviced and cleaned regularly. The frequency depends on how often it is used. The integrated cleaning and descaling system increases the service life of the steam generator. However, the required frequency of descaling and maintenance intervals depend on use and water quality.
Page 97: Descaling
The descaling process lasts approx. 45 minutes. Approx. 400 ml of descaler is needed for each descaling process. After the unit switches off, the intermission period prior to descaling can be used to, e.g. clean and check the cabin. The descaling process is not SteamRock II Premium - Operating Instructions...
Page 98: Regular Maintenance
 Begin service work only once the steam generator has been switched off and is cool.  Allow the vaporiser tank and pipelines to cool for approx. 30– 45 minutes.  Wear safety goggles/protective clothing (gloves). Operating Instructions - SteamRock II Premium...
Page 99 Recommended service intervals Interval Private use At least once per year Commercial use At least twice per year More often, depending on how often it is used and the water quality SteamRock II Premium - Operating Instructions...
Page 100: Resetting The Safety Temperature Limiter
 The Reset button should be operated only by qualified person- nel.  Starting the reset Rectify the reason for overheating.  To troubleshoot, see 6.5 Troubleshooting,  102. Open the housing; see the installation instructions. Operating Instructions - SteamRock II Premium...
Page 101  Reset button  If pressing lightly is insufficient, wait until the unit has cooled down further. Close the housing; see the installation instructions. Restart the unit.  See 4.4.1 Switching steam generation on/off,  30 SteamRock II Premium - Operating Instructions...
Page 102: Troubleshooting
Check water supply. Clean the filter at the water supply connector if necessary. Water inlet valve blocked or clogged. Clean the valve and make sure it is opera- tional. Replace the valve if necessary. Operating Instructions - SteamRock II Premium...
Page 103 Overheating in the water tank Rectify the reason for overheating. (Display error message) Caution: Allow the steam generator to cool at least 30 min. prior to resetting the safety temperature limiter. Press the Reset button. SteamRock II Premium - Operating Instructions...
Page 104: General Terms And Conditions Of Service
In the case of a warranty claim, the manufacturer shall provide replace- ment parts necessary for servicing free of charge. IV. Service visit by the manufacturer Services rendered on site by an employee of the manufacturer must be agreed in advance. Operating Instructions - SteamRock II Premium...
Page 105 Complaints in respect of our products shall be reported to the responsible distributer and shall be handled exclusively by said distributer. SteamRock II Premium - Operating Instructions...
Page 106 General terms and conditions of service The manufacturer’s General Terms and Conditions of Business, in the ver- sion available at www.eos-sauna.com/agb, shall apply in addition to the foregoing terms and conditions of service. Operating Instructions - SteamRock II Premium...
Page 107: Disposal
The following materials are used in the packaging:  Used paper  Plastic foil and protective film Electronic waste Electronic waste must be disposed of at the designated local collection point for electronic waste. SteamRock II Premium - Operating Instructions...
Page 108 Store this address with the Operating Instructions in a safe place. Please always provide us with nameplate data, such as model, item num- ber and serial number so we can provide fast and efficient support. Date of sale Stamp/retailer signature: © EOS Saunatechnik GmbH - All rights reserved.

This manual is also suitable for:

Steamrock ii premium nc

EOS SteamRock II Premium Operating Instructions Manual

Table of Contents

Documentation

1 General Safety Instructions

2 Identification

3 Description of the Control Panel

4 Operation

En Operation

En Service Settings

6 Cleaning and Servicing

7 General Terms and Conditions of Service

8 Disposal

Quick Links

Chapters

Need help?

Questions and answers

Related Manuals for EOS SteamRock II Premium

Summary of Contents for EOS SteamRock II Premium

This manual is also suitable for:

Table of Contents