EAS Electric EMV70DGW User Manual page 20

OPERATION INSTRUCTIONS
When the oven is first connected to the electrical supply wait for the display automatically show
a beep sound once and the
please note that is
: 24
To set the correct time of day
Press button to adjust the hour setting
1> "+" "-"
Press to confirm the hour setting
2> " "
Press button to adjust the minute setting
3> "+" "-"
Press to confirm the minute setting and
4> " "
Note: If the display does not flash, adjust the time of day by pressing the"+" and"-" buttons at
the same time for more than 3 seconds.
Oven On and Off
If the timer is in standby mode，press
mode and the symbol
1>Set the desired cooking function and the temperature degree.
2>Set the time function, then the oven will on.
If you set Dur or End , after cooking ,the oven will automatically turn off.
If you set manual or minute minder, after cooking, bring the cooking function and oven temperature
knob to "0" position. Press"
Time function setting
In manual mode,
pressing
-
Manual mode
Minute minder Dur End
temperature if required.
Manual mode :
In manual mode, only the day's time and the symbol "
be controlled by the user.
Notes: In manual mode, to ensure the oven is not left on accidentally,after 5 hours no any button
pressed, the timer will flash once a second to warn you the oven will enter standby mode. After a
total of 10 hours, the timer will enter standby mode.
When the timer is flashing in manual mode, press any
continue using the oven. Or press"
if oven will not be used.
flash Ensure the correct time of the day is set before using the oven.
"12""." .
hour clock for example PM shown as
,
.
" "
will light up continuously .
" "
"and "+" buttons for more than 3 seconds to return to standby mode.
can enter the time function
"
"
- - -
Manual mode
"and"+"together for more than 3 seconds to enter standby mode
,
2 14.00.
.
.
the timer will be in standby mode.
for more than 3 seconds, the timer will enter manual
setting,
.
Then selected cooking function and ajust the cook
"lights up. The cooking duration has to
button to reset the timer if you intend to
EN-8
the sequence of the function setting is
"12.30",
V.2