Datcon DT9100 B Operating Instructions Manual page 52


Use supervisor
code

52
Changing the Supervisor Code (Supervisor Code)
The new Supervisor Code must be typed in twice in order
to avoid any typing errors. The mnemonic
Type) warns you to type in the code for the second time,
after you have typed it in once. If the two codes are not
identical with each other, the mnemonic
Code) appears on the display and the instrument exits the
menu item.
Make sure that you do not forget the Supervisor Code;
otherwise a new one can be defined only in the service.
[Default factory setting: 1000]
Test functions (Test)

•
display test (Test: LCD)
for testing whether the display works properly

•
output test (Test: Output)
Force digital output for a desired state.

•
synchronizing test. Shows the state of
synchronize input.

•
temperature test. Shows the inside temperature
of RTC.
DT9100 B

(Re-

(Bad
20180905-V120180905