Table of Contents
Advertisement
Sequence of operations 9. If the codes written in for the first and second time are
Returning to the menu
item Changing the user
code
Exit from the menu
34
identical with each other, the device exits the menu item.
You will see this
Do not forget the user code you have specified. If you
forget it, defining another one is possible only by using a
supervisor code for entering into the menu.
1. As you have already left the menu item Changing the
user code, you will see this:
(2. If you want to change the setting you have just
performed, or if you just want to check what you have typed
in, continue the operation from Point 3 of the Sequence of
operations.)
(3. If you do not want to exit the menu, as you want to
perform further settings, you may press the ▲ button to
select the desired menu items.)
1. Press the MENU button. First the mnemonic
(Save), then the mnemonic
the display. With that, the storing of the settings is
completed. The instrument has exited the menu and goes
on with the measurement.
on the display.
.
(Exit) will be shown on
DT9100 B
20180905-V120180905
Advertisement
Table of Contents
