Table of Contents
Advertisement
REFRIGERATOR INSTALLATION
NOTE: Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow
opening. If it is necessary to remove the handles, follow the directions below.
REMOVING AND REPLACING HANDLES CONTINUED
NOTE: Handle appearance may vary from the illustrations
on this page.
Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of
the handle with a
handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
Replacing Freezer Drawer Handle
Place the handle on the door by tting the handle
footprints over the mounting fasteners and tightening
the set screws with a
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
WARNING
When assembling or disassembling the handles:
Grasp the handle rmly to ensure it will not drop or
cause injury.
Prevent the handle from swinging toward nearby
people or animals.
Insert the bracket hole of the handle into the
stopper bolt of the door exactly, then assemble the
set screws to x the handle in place.
Check for any gap between the door and handle
after the handle is xed in place.
in. Allen wrench and remove the
in. Allen wrench.
12
Advertisement
Table of Contents
