Removing A Fixed Disk Drive - Digital Equipment DEC 3000 600 AXP Options Manual

Removing a Fixed Disk Drive

Remove the To remove a fixed disk drive:
Drive
1. While pushing down on the release latch
Figure 4–4 Removing a Fixed Disk Drive
2. Disconnect the internal SCSI cable by pulling on the white
3. Carefully place all cables back into the system unit.
end of a pencil, push the disk towards the release lever and
lift out , as shown in Figure 4–4.
1
tab and disconnect the power cable.

Removing a Fixed Disk Drive

with the eraser
2
MLO-009702
Installing a Fixed Disk Drive 4–5