Datavan Wonder Series Quick Installation Manual

Technical Support
1. To enter the Boot Menu, press F10.
2. To set CMOS default, press F2 to enter CMOS setting and load optimized defaults
3. Refer to User Manual for other technical information and FAQs. If the problems
are not resolved, contact your local vendor for further support and provide them
with the information below: product name, product serial number, and detailed
description of your problem.
Safety notices
Before You Proceed
• Read safety notice and User Manual carefully before using the product.
• Keep the box and packaging in case the product needs to be shipped in the
future.
• Follow the product and warning label instructions.
• Any changes or modifications that do not follow the instructions in this
manual will void this product's warranty.
Power Supply Safety Notice
• To avoid electric shocks, disconnect the power cord from the electrical
outlet before relocating the system.
• Make sure the voltage of the power outlet conforms within voltage range
of the terminal. Failure to comply may cause the electric shock or damage
to the terminal. If you are not sure of the electricity voltage that you are
using, contact your local electricity company.
• To avoid fire or electric shocks, do not overload electric power outlets.
• Protect the power cord from being walked on or pinched particularly at
plug, convenience receptacles, and the point where they exit from the
apparatus.
NOTICE
The version of these drivers and manuals is subject to change without notice.
For update, please contact your local agent.
Z PK M U- 0 01 6 4
Wonder Series
Quick Installation Guide V1.0