Wiring Instructions - NOMA Arctic Owner's Manual

· Raise canopy-motor assembly to mounting plate's
hook and hang by the screw hole on the canopy.
This will allow for hands-free wiring.
bracket's hook, follow wiring instructions (Fig. 2).
Tips:To reduce the risk of personal injury,
seek the help of another person to hold the
stepladder in place and to lift the fan up to you
once you are set on the ladder.
!
IMPORTANT: If you are not sure if the electrical outlet box and fan are grounded, contact a licensed
electrician for advice. They must be grounded for safe operation.
!
W ARNING
before wiring.
Remote and Receiver Pairing
Codes are set by pushing the location of the dip switches located on the transmitter and receiver
up or down. It is important that the code used for both the remote and receiver are identical for
the two devices to be able to communicate; otherwise, the remote will not be able to control the
fan.
If you plan to install more than one fan, each fan will require the remote and receiver to use
a unique code, or else one remote will be able to control more than one fan.
Installing Receiver Assembly
Once the connection has been made, the receiver inserts into the drop rod hanging bracket.
The canopy comes up to cover the receiver and bracket.
3 Hands free wiring
!
!
!
Hands-free Wiring

Wiring Instructions

Hook
Non-slotted hole
Fig. 2
7
3