OPERATING INSTRUCTIONS
Operation
Place the fan on a safe, flat surface where it cannot fall or be pulled by the cord.
Adjust the desired speed by pulling the chain switch at the back of fan (A1).
0
Stop
1
Low
The fan comes with an additional oscillation function.
Turn the oscillation function on by pushing the oscillation button down (A2).
To change the angle of the fan, loosen the angle adjuster, and then tilt the protective
screen up or down and finally retighten the angle adjuster (A3).
02
2
Medium
3
High
5
02.
A1
A2
A3
6