NOMA Arctic Owner's Manual page 2

Toll -free 1-866-827-4985 model no. 052-8699-6
Safety Rules – Read and Save These Instructions
before beginning.
2. All wiring must be in accordance with the national and local electrical codes. Electrical installation should
be performed by a qualified licensed electrician.
3. WARNING: To reduce the risk of electric shock or fire, do not use this fan with any solid-state fan speed-
control device. It will permanently damage the electronic circuitry.
4. CAUTION: To reduce the risk of personal injury, use only the screws provided with the outlet box.
5. The outlet box and support structure must be securely mounted and capable of reliably supporting a
minimum of 35 lb (15.9 kg). Use only UL listed outlet boxes marked "FOR FAN SUPPORT."
6. The fan must be mounted with a minimum of 8'2" (2.5 m) from the trailing edge of the blades to the
floor.
7. Avoid placing objects in the path of the blades.
8. To avoid personal injury or damage to the fan and other items, be cautious when working around or
cleaning the fan.
9. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth will be suitable for
most cleaning.
10. After making electrical connections, spliced conductors should be turned upward and pushed carefully
up into the outlet box. The wires should be spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the outlet box and the ungrounded conductor on the
other side of the outlet box.
11. All set screws must be checked and retightened where necessary before installation.
Warning:
To reduce the risk of fire, electric shock, and personal injury, mount fan to outletbox marked "acceptable
!
with the screws provided with the outlet box.
for fan support"
Warning:
To risk of personal injury, do not bend the blade arms (also referred to as flanges) or the brackets while
!
balancing the blades or cleaning the fan. Do not insert foreign objects between rotating fan blades.
Warning:
To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked "acceptable for
fan support of 35 lb (15.9 kg) or less" and use mounting screws provided with the outlet box. Most outlet boxes
!
commonly used for the support of light fixtures are not acceptable for fan support and may need to be replaced.
Due to the complexity of this fan, a qualified licensed electrician is strongly recommended.
Attention:
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
!
this device must accept any interference, including interference that may cause undesired operation of
the device.
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.