Page 1: Table Of Contents
General Information Safety precautions…………………………………………….. Packaging………………………………………………………. Disposal………………………………………………………… The Training Apparatus Equipment………………………………………………………. Parts List………………………………………………………… Parts List………………………………………………………… Hardware………………………………………………………… 6 Assembly 1. Assembly instructions………………………………………. 2. Mounting the front foot………………………………………. 8 3. Mounting the back foot………………………………………. 8 4. Mounting the pedal…………………………………………… 9 5. Mounting the support cover…………………………………. 9 6.
Page 2: General Information
General Information SAFETY PRECAUTIONS The training device is intended for use at home. The device fulfils the requirements DIN EN 957-1/5 class HC and has been examined by the TüV-GS (safety standards authority). The device has been tested to this norm with a constant load of a body weight of 150 kg. The CE mark relates to the electromagnetic compatibility (EC guideline 89/336/EWG and EN55081-1).
Page 3: The Training Apparatus
The Training Apparatus BP210 Equipment details: Handlebar for optimum body position when training Training computer clear LCD display (incl. 2 batteries). Functions: time, speed, distance, Pulse measurement takes place via calories, pulse rate. hand-contact sensors on the handlebar Comfortable, 8 level tension...
Page 4: Parts List
Parts List ASSEMBLY Before beginning assembly please first take a look at the diagram below and familiarize yourself with the labeled parts.
Page 5: Parts List
Parts List Parts No Description Q’ty End cover for handle bar 2 PCS Foam grip 2 PCS Screw for handle bar 6 PCS Curve washer for hand pulse sensor 6 PCS Handle bar 1 PC Computer cable 4 PCS Screw for sensor 4 PCS Metal plate for handle bar 1 PC...
Page 6: Hardware
Screw for chain cover 8 PCS Plastic cover for crank 2 PCS Pedal (L and R) 2 PCS Carriage Bolt for front foot tube 2 PCS HARDWARE On this page all the hardware (screws, washers, nuts and tools) is shown, which you need to assemble...
Page 7: Assembly
ASSEMBLY To make assembly of the home trainer as easy as possible we have pre-assembled the most important parts. Before you assemble the device you should carefully read these assembly instructions and then proceed step-by-step as described. Assembly Instructions Carefully read these assembly instructions before attempting to put the Basic Home Trainer together.
Page 8: Mounting The Front Foot
2. Mounting the front foot Attach the front foot (39) to the base by using two screws (51), two washers (37) and two nuts (36). Figure 2 3. Mounting the back foot Attach the back foot (22) to the base using two screws (21), two washers (37), and two nuts (36).
Page 9: Mounting The Pedal
4. Mounting the pedal Screw the right pedal (50)(R) in a clockwise direction and the left pedal (50)(L) in a counter-clockwise direction onto the right and left pedal cranks (25). Figure 4 5. Mounting the support cover Slide the saddle support cover (18) over the saddle support (17) and insert them into the base.
Page 10: Mounting The Saddle
6. Mounting the saddle Fasten the saddle (14) to the saddle support (17). Ensure screws are fastened tightly in order prevent saddle from potentially tilting during training. Figure 5...
Page 11: Mounting The Handbar Post
7. Mounting the handlebar post Screw the four pre-assembled hexagonal socket screws (3), four washers (4), and the nuts (36) to the base. Ensure that the pedal resistance regulator (12) is set to level 1. Insert the handle bar column into the base. Connect the upper computer cable (32) and the lower computer cable (30) ensuring that the connection is correct so as to allow the signal to be transmitted to the computer.
Page 12: Mounting The Tension Control
8. Mounting the tension control Attach the handle bar column (13) using the four hexagonal socket screws (3), four washers (4), and four nuts (36). Turn the pedal resistance regulator (12) back and forth to ensure that it moves easily. The resistance regulating cables (31, 33) must be removed and the procedure repeated if this is not the case.
Page 13: The Computer
The Computer 1. LCD display and computer functions PULSE TIME CALORIES SPEED DISTANCE Using the Computer MODE: To select functions of time, speed, distance, calories and pulse (if available). Hold the button for two seconds in order to reset functions. SCAN: Press “Mode”...
Page 14: Training Information
Training Information Information: Generally speaking, any healthy person can start fitness training. Keep in mind, however, that you cannot make up for a long period of neglect in a short time. Physical fitness, increased endurance and well being can easily be achieved through a suitable training program.
Page 15: Parts List
Spare parts...

Mylna sport BP210 Manual

General Information

The Training Apparatus

Assembly

The Computer

Training Information

Other Useful Information

Quick Links

Need help?

Questions and answers

Related Manuals for Mylna sport BP210

Summary of Contents for Mylna sport BP210

Table of Contents