Technical Data - HAEGER Expresso Italia CM-85B.009A Instruction Manual

coffee maker. Press the button "coffee switch" and wait for a few seconds,
then press "coffee switch" again to close flow of the water.
Regular cleaning after each use
WARNING:
Before cleaning, always remove the mains plug and wait
•
until the device has cooled down.
Do not immerse the device in water. Otherwise this might
•
result in an electric shock or fire.
Do not clean with alcohol or solvent cleaner.
•
1. Clean the housing of coffee maker with moisture-proof sponge often and
clean water tank, drip tray and removable shelf regularly under warm
running water.
2. Detach the filter holder through turn it anticlockwise, get rid of coffee
residue inside, then you can clean it with a cleaner, but at last you must rinse
the parts with clear water.
3. Clean all the attachments and dry thoroughly.
Cleaning mineral deposits
To make sure your coffee maker operating efficiently, you should clean away
the mineral deposits left every 2-3 months. To do this:
1. Fill the tank with water and descaler to the MAX level (the scale of water
and descaler is 4:1); the detail refers to the instruction of descaler. Please use
"household descaler". You can use also the citric acid instead of the
descaler (the relation is three parts of water and one part of citric acid).
2. Operate the appliance for two cycles following the steps for making
espresso and frothing milk and rinse the device with the water /descaler
mixture.
3. Following this, and to flush out any traces of descaler or citric acid, operate
the coffee maker for a further two cycles but with water only.

Technical Data

Model: ............................................ CM-85B.009A
Power supply: ................................. 220 -240V~, 50Hz
Power consumption: ..................... 850W
Filling quantity: ............................... 1.6 Litre
Protection class: ............................ I
Net weight: ..................................... approx. 3 kg
Instructions for use
English
7