Table of Contents
Advertisement
Backlight
Press any key to activate the backlight function. The backlight turns off
automatically after 10 seconds of inactivity.
Auto Power Off
This meter will shut off automatically 20 minutes of inactivity.
To disable the auto power off, pressing " SET " + " HOLD" keys simultaneously
while turning on the meter until a "n" appeared on the screen and then
release keys to return to normal mode.
Setup
The advanced setup mode lets you customize your meter.
7 parameters are available in this model.
P2.0: Clear memory
P3.0: Electrode data
P4.0: PH buffer selection
P5.0: READY indication
P6.0: Temperature unit
P7.0: Real time clock
P8.0: Reset
To enter SETUP mode, hold down "SET"key >1 second while in normal
measurement mode. Press " " or " "to select parameters and press
"ENTER"for parameter settings. To exit any setting, press "Esc" key.
Note: P1.0 memory transmitting function is not available in this model.
P2.0 Memory Clear(CLr)
To clear the stored data, press "MODE" key to select the parameter (pH or
mV) which you want to clear before entering setup mode.
4
Advertisement
Table of Contents
