Motor - Brother DA-9280 Manual

4-2. Motor

All cords should be secured at least 25 mm away from any moving parts. Furthermore, do not excessively bend the cords
or secure them too firmly with staples.
If this is not observed, fire or electric shocks may result.
Install the correct belt cover which corresponds to the motor being used.
<Motor>
Select the correct motor from those listed in the table below.
Refer to the instruction manual for the motor for details on installing and using the motor.
Power
Single-phase
Three-phase
<Motor pulley and V-belt>
For details on the relationship between the motor pulleys and belts, refer to the table below.
* The belt should be an M-type V-belt.
Pulley O.D.
Belt size
50Hz
Sewing speed (rpm)
60Hz
CAUTION
Motor
2-pole, 400 W motor
2-pole, 400 W motor
85 90 95
M45
3100
100 105 110 115
M46
3100
3600 4000
DA-9280
4.
120 125 130
M47
3600 4000
4