Complete Jaw Disassembly - Nespresso EF 737 Service Manual

Repair

Complete jaw disassembly

Tools:
- Hammer (plastic head)
- Drift No. 4
- Torx screwdriver T10
- Torque wrench
Procedure:
1 Follow general disassembly stage 1 and 2
(see pages 24 and 25).
2 Disassemble jaw as per page 34.
3 Remove capsule cage (137, see page 37).
4 Remove cover (112).
5 Remove both springs (98).
6 Remove shafts (108 +127).
7 Remove side closing lever (120), locking
lever (119) and shaft (113).
8 Remove swivelling plates (97) with ejector
lever (94) and spring bearing (99).
- Procedure for complete disassembly of the jaw
35