Advertisement
SNCA-CFW1
1.Introduction
SONY Wireless Network Adapter offers performance comparable to Ethernet Local Area Network
(LAN) system, without the limitations of network cables. It allows you to connect Network camera
to a Local Area Network from anywhere within the wireless coverage area. It also enables you to
roam throughout the network while remaining connected to the LAN.
Package Contents
Make sure the following materials are available before beginning:
SNCA-CFW1 Wireless LAN Card
System Requirements
This Wireless LAN Card only operate with SONY Network camera.
Laptop PC, Desktop PC, PDA or other peripherals cannot work properly.
option
a) External polarity antenna with 1m long cable
2. Installation guide
802.11b Wireless LAN Card
Before insert Wireless LAN card, make sure Network camera's power switch is off.
After insert Wireless LAN card into CF slot, power on Network Camera's Power switch.
Network configuration
a) Install Utility Software into PC.
b) Connect PC and Network Camera by Ethernet cross cable.
c) After insert Wireless LAN card, switch on Network Camera.
d) Start utility program.
e) Setting IP address.
f) Setting SSID.
g) Setting WEP
External polarity antenna
Wireless LAN card has external antenna connector. External antenna can expand
communication distance.
Installation
a) Setting Antenna.
b) Use 1m long cable, connect Antenna connector and Wireless LAN card external connector.
c) By Utility software, select "External antenna".
Page 4 of 7
Advertisement
