Huawei AR200-S Series Quick Start Manual page 10

Huawei AR200-S Series Enterprise Routers
Quick Start Guide
Table 1-3 Indicator description
Numbe
r
1
2
3
4
5
6
Issue 01 (2011-12-30)
Indicator Color
PWR Green
SYS Red and
green
USB Red and
green
PPP Green
VPN Green
LINK Green
ACT Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
If the indicator is steady on, the system power
supply is normal.
If the indicator is off, no system power supply is
available.
If the indicator blinks green once every 2s (0.5
Hz), the system is running properly.
If the indicator blinks green once every 0.25s (4
Hz), the system is powering on or restarting.
If the indicator is red, a fault that affects services
has occurred and cannot be rectified
automatically. The fault needs to be rectified
manually.
If the indicator is off, the software is not running
or is being reset.
If the indicator is green, devices have been
deployed by using the USB disk.
If the indicator blinks green, the router is being
deployed using the USB disk.
If the indicator is red, the router is failed to be
deployed using the USB disk.
If the indicator is off, the USB disk is not inserted,
the USB interface fails, or the indicator fails.
If the indicator is steady on, a PPP connection is
set up.
If the indicator is off, no PPP connection is set up.
If the indicator is steady on, the VPN service is
available.
If the indicator is off, the VPN service is
unavailable.
If the indicator is steady on, a link is connected to
the WAN port.
If the indicator is off, no link is connected to the
WAN port.
If the indicator blinks green, the WAN port is
transmitting or receiving data.
If the indicator is off, the WAN port is not
transmitting or receiving data.
1 AR200-S Overview
5