Care And Maintenance - Hay REVOLVER TABLE Instruction Manual

CAUTION
With a little care you can prolong the life of your
furniture. Follow the instructions for the materials
of your specific product to make sure that it stays
in the best shape for as long as possible.
The information below is only intended as a general
guideline. For more information on how to remove
specific stains, please enquire where you bought
the furniture.
• Always remove stains quickly before they can do any
permanent damage to the furniture.
• When you move your table, make sure you lift it rather
than pulling or pushing it to avoid damaging the floor,
legs and mountings.
• Use coasters under damp, hot or coloured objects to
avoid permanent stains.
• Be careful not to scratch or damage the surface with
sharp objects.
• Check the status of the gliders frequently and if worn
down, contact your local retailer to buy replacements.
The durability of the gliders will depend on the surface
the table is placed on.
• Avoid improper use such as putting your feet on the
table or standing on it.
C A R E A N D M A I N T ENA NCE
POWDER COATED STEEL
• Wipe with a clean cloth wrung in water or in a
solution of water and a neutral detergent. Remove soap
residue immediately using a clean, dry cloth.
• Avoid using scouring cream or scouring pads, as they
may scratch the surface.
• Do not use solvents as they may have an adverse effect
on the coating.
• Never use acetic acid or citric acid.