Table of Contents
Advertisement
OPERATING INSTRUCTIONS
The air sucked by the fan enters from the grill and
passes through the filter, then it is cooled/dehumidified
or heated through the heat exchanger.
The direction of the air outlet is motorized up and down
by flaps, and manually moved right and left by the vertical
deflectors, for some models, the vertical deflectors could be
controlled by motor as well.
SWING or SELF-CLEAN function
1. Press the button SWING to activate the louver,
(1) Press
to activate the horizontal flaps to
swing from up to down. Press again to stop the swing
movement at the current angle.
(2) Press
to active the vertical deflectors to
swing from left to right. Press again to stop the swing
movement at the current angle.
2. If the vertical deflectors are positioned manually which
placed under the flaps, they allow to move the air flow
direct to rightward or leftward.
3. For some inverter heating models, press horizontal
SWING and vertical SWING together button at the
same time, it will activate the Self-Clean function.
Note: Self-clean function is a pre-setting program, it will
operate as frosting and defrosting of indoor unit to
clean the surface of indoor evaporative coil
This adjustment must be done while the appliance
is switched off.
Never position Flaps manually, the delicate mec-
hanism might seriously damaged!
Never poke fingers, sticks or other objects in the air
inlet or outlet vents. Such accidental contact with live
parts might cause unforeseeable damage or injury.
Heat
flap
movement Vertical Deflectors
14
Filter
Fan
Horizontal Flaps
Advertisement
Table of Contents
