Remote Start - Viper 552 Series Owner's Manual

Remote Start

This feature allows you to remotely start and run your vehicle for
a programmable period of time. This makes it possible to warm up
the engine, as well as adjust the interior temperature of the vehi-
cle with the climate control system. If interior heating or cooling
is desired, the climate controls must be preset, and the fan blower
must be set to the desired level prior to remote starting the
vehicle.
IMPORTANT! (1) Never remotely start the vehicle with the vehicle
in gear, and (2) Never remotely start the vehicle with the key in the
ignition.
To remote start the vehicle:
1. Simultaneously press
second.
2. The parking lights will flash to confirm that the vehicle will
attempt to start.
3. Release the and
flash. (In gasoline vehicles, the engine will start 4 seconds
after the parking lights flash. In diesel vehicles, the engine
will start when the WAIT-TO-START indicator on the vehicle's
dash goes out.)
4. Once the vehicle has started, it will run for the pre-program-
med period of time (either 12, 24, or 60 minutes - see
Programming Options section of this guide) or until a shut-
down input is triggered.
2000 Directed Electronics, Inc.
©
and on the transmitter for one
buttons as soon as the parking lights
11