Table of Contents
Advertisement
Installation Guide
Connecting the 16043A/B to a Measuring Instrument
Connecting the 16043A/B to a Measuring Instrument
The contact board should be mounted; the device guide fabricated and mounted, and the
test fixture should be connected to the measuring instrument.
Mounting the Contact Board
Select a contact board that matches the size and shape of the DUT, and then place it on the
fixture. For details, see "Selecting and Mounting the Contact Board" on page 29.
Fabricating and Mounting the Device Guide
Fabricate the provided blank device guide and make the device hole. Mount this device
guide on the fixture. For details, see "Fabricating the Device Guide" on page 27 and
"Mounting the Device Guide" on page 32.
Connectable Measuring Instruments
The 16043A/B Test Fixture can be connected to a Measuring instrument using four BNC
connectors.
Table 1-3
Instruments With Four BNC Connectors Connectable
With the 16043A/B
Model
Name
4294A
Precision Impedance Analyzer
4194A
Impedance/Gain Phase Analyzer
4263B
LCR Meter
4278A
1 kHz/1 MHz Capacitance Meter
4284A
Precision LCR Meter
4285A
Precision LCR Meter
14
Chapter 1
Advertisement
Table of Contents
