Maytronics Dolphin Classic 5 Operating Instructions Manual page 11

Press the Manual/Automatic select button and then choose the desired parameters according to the
following table:
Cleaning cycle Fast
indicator
2-hour cycle
This determines
the length of the
cleaning cycle.
Delay time Immediate start
indicator (Default setting)
This determines
when the pool
cleaner starts to
work. Delaying
allows the dirt
to settle to the
bottom of the
pool.
Cleaning action Standard
indicator Floor and wall
Allowing you to cleaning.
choose from the (Default setting)
following options.
Note:
• After 2 minute if no button is pressed, the Remote Control Unit will shut-down and the Pool cleaner
will continue to work in the previous settings.
• When the "Ultra-Clean" and "Walls Only" options finish their cycles, the Pool Cleaner will return to
default settings.
10
Efficient Extra
3-hour cycle for 4-hour cycle
everyday use.
(Default setting)
One-hour delay Two-hour delay
Ultra-clean Floor only
Stronger suction Cleans only the
and slower floor and the area
movement. where the floor and
(floor and wall) walls meet
Dolphin Classic 5 / Top 5 Pool Cleaner | Operating Instructions
Walls only
Cleans walls and
waterline only