Troubleshooting; Circuit Diagram - Vinotemp VT-BC-1 Owner's Manual

Vinotemp beverage cooler owner's manual

Hide thumbs

Table Of Contents

Table of Contents

Drip pan

• When the compressor stops working, water drops will drain through the

outlet in the inner back wall into the drain pan (above the compressor).

• If the drain pan needs to be cleaned, pull the drain pan forward gently

and reinstall it after cleaning.

If your cooler does not work properly, please note the following suggestions

before you attempt to repair.

Cooler does not work:

• Check the electrical outlet for power, and that the plug is properly

inserted.

• Check the condenser for proper cleaning.

• The circuit breaker is tripped or the fuse is blown.

Cooler makes too much noise:

• Check that the cooler is level.

Compressor turns on and off frequently:

• The room temperature is higher than normal.

• The door is not closed completely.

• The door gasket is not sealed well.

• There is insufficient clearance around the cooler.

• The temperature is not set properly.

• The cycling frequency will reduce when all of the cans reach the set

temperature.

The following is not a malfunction:

• It is normal to hear gurgling sounds caused by the flow of refrigerant

when each cooling cycle ends.

115V 60Hz

Control Enclosure

1 7 6 3 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1