Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. • Let the unit rest UNPLUGGED for 12 hours once you have it placed in your home.
TABLE OF CONTENTS... 4 IMPORTANT SAFETY INSTRUCTIONS... 4 PARTS AND IDENTIFICATION... 5 ELECTRIC CONNECTION... 5 INSTALLATION ... 5 START-UP PROCEDURES ... 6 LIGHT CONTROL ... 6 MAINTENANCE... 6 TROUBLESHOOTING ... 7 CIRCUIT DIAGRAM ... 7 TERMS OF SALE AND WARRANTY ... 8 SERVICE &...
PARTS AND IDENTIFICATION ELECTRIC CONNECTION This unit operate with an 115V~60Hz power supply. Check the electrical outlet for proper voltage. Warning: Do not plug other electrical appliances into cooler outlet. The coolers are supplied with 8ft length electric cord. Do not use extension cords.
START-UP PROCEDURES • Plug the cabinet into the electrical outlet; operate the cooler for at least three hours. This will aid in refrigeration performance. • Do not adjust the temperature control. The temperature control is factory set to provide maximum performance. •...
Drip pan • When the compressor stops working, water drops will drain through the outlet in the inner back wall into the drain pan (above the compressor). • If the drain pan needs to be cleaned, pull the drain pan forward gently and reinstall it after cleaning.
Any claim for damages incurred during shipment by the carrier of the goods are insured and handled directly with the carrier. Any damages due to manufacture defects will be handled directly with Vinotemp International, subject to the limited warranty.
Rancho Dominguez, CA 90221 www.vinotemp.com Vinotemp is a registered trademark of Vinotemp International. All products, features, and services are subject to change without notice. We cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.
Need help?
Do you have a question about the VT-BC-1 and is the answer not in the manual?
Questions and answers