Loudspeaker (Sp9, Sp10) (Center)-2 - Sony HT-ST9 Service Manual

2-35. LOUDSPEAKER (SP9, SP10) (CENTER)-2

1 Lift up the loudspeaker (SP10)
in the direction of the arrow.
7 terminal
3 terminal
Left side
6 cushion
(absorbent)
Bottom side
ow to install the tweeter speaker wire
Note 3: When installing the speaker wire,
make the position of caulking of
terminals is upside.
terminal [blue]
(tweeter)
terminal [blue] terminal [black]
(connection cable (connection cable
with speaker) with speaker)
[blue]
(wide side)
[white]
guide
– Center speaker block front view –
Caulking is upside.
terminal [black]
(tweeter)
two grooves
– Cabinet center block top view –
8 loudspeaker (18 mm)
(tweeter (center)) (SP10)
4 loudspeaker (6.5 cm)
(woofer (center))
(SP9)
7 terminal
[black]
3 terminal
(narrow side)
[black]
2 Lift up the loudspeaker (SP9)
in the direction of the arrow.
5 baffle (center)
Top side
screw boss
terminal [blue]
screw boss
HT-ST9
Installation direction for
the woofer speaker wire
Note 1: When installing the speaker wire,
make the position of caulking of
terminals is outside.
OK NG
Caulking is
Caulking is
outside. inside.
Note 2: When installing the baffle (center),
install so that the guide is at the
bottom side.
Right side
two grooves
terminal [black]
43