Download
Share
Print this page
  1. Manuals
  2. Brands
  3. CHIEF Manuals
  4. Enclosure
  5. PAC501
  6. Installation instructions manual

CHIEF PAC501 Installation Instructions Manual

In-wall enclosure
Hide thumbs Also See for PAC501:

Advertisement

Quick Links

Download this manual
I N S T A L L A T I O N I N S T R U C T I O N S
IN-WALL ENCLOSURE
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
PAC501

Advertisement

loading
Need help?

Need help?

Do you have a question about the PAC501 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for CHIEF PAC501

Summary of Contents for CHIEF PAC501

  • Page 1 I N S T A L L A T I O N I N S T R U C T I O N S IN-WALL ENCLOSURE Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description PAC501...

  • Page 2: Important Safety Instructions

    16" on center, follow all instructions can result in serious personal injury, and is to be used with a Listed Chief PNRIW Series large in- damage to equipment, or voiding of factory warranty! It is the wall swing arm wall mount (not included).
  • Page 3 Installation Instructions PAC501 DIMENSIONS 2X 25.90 657.7 2X 22.90 ELECTRICAL CUTOUT 581.5 5.89 DESIGNED TO FIT A SINGLE GANG 149.7 .136 3.925 RACO 590, STEEL CITY CY 1/2 OR 3.45 2.38 3.425 60.3 SIMILAR STYLE ELECTRICAL BOX 1.750 .390 44.45 2X 2.00...
  • Page 4 PAC501 Installation Instructions TOOLS / HARDWARE REQUIRED FOR INSTALLATION HARDWARE REQUIRED (not included) 3/16" • #10 x 2-1/2" countersunk wood screws (Qty. 20) (wood studs) • 2" x 4" wood for framing and support blocks (wood studs) • jamb-studs and cripple studs for steel stud framework •...

  • Page 5: Installation

    Remove exposed portion of center wood stud flush with 16" on center. Installation of PAC501 in 2" x 4" wall results in upper and lower drywall edges. nearly direct contact with vertical studs and back wall.
  • Page 6 Installation Instructions Site Requirements (Steel Studs) 16" (on center) Studs PAC501 Installation Location (Must be centered over three studs) If back side of wall is unfinished, drywall must be installed to a minimum of one stud left and right of the studs being used to install the mount.
  • Page 7 (Typical for each holes. (See Figure 4) jamb stud) Attach the PAC501 (A) to side studs using four M7 x 50mm Allen head connector screws (D) and mounting spacers (B) using an M4 Allen head drill bit (E). (See Figure 5) Figure 3 Cut four 8"...
  • Page 8 Grounding Lug Locations Figure 5 NOTE: The PAC501 has 1/2" total clearance between the two studs. The spacers allow side to side adjustment. Drill eight 3/16" diameter pilot holes in horizontal framing at top and bottom mounting holes. (See Figure 6)
  • Page 9 Installation Instructions PAC501...
  • Page 10 PAC501 Installation Instructions...
  • Page 11 Installation Instructions PAC501...
  • Page 12 A 6436 City West Parkway, Eden Prairie, MN 55344 P 800.582.6480 / 952.225.6000 F 877.894.6918 / 952.894.6918 Europe A Franklinstraat 14, 6003 DK Weert, Netherlands Chief, a products division of P +31 (0) 495 580 852 Milestone AV Technologies F +31 (0) 495 580 845 Asia Pacific A Office No.