Install The Tank Hose - Raven SmarTrax 117-5031-001 Installation Manual

Pressure Hose Installed
FIGURE 5.
Install a -12 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-029) in the open pressure port.
2.
Connect the machine's pressure hose to the opposite end of the installed tee fitting.
3.
Install a -12 ORFS (F) to -8 ORFS (M) reducer adapter fitting (P/N 333-0012-030) on the 90° end of the
4.
installed tee fitting.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-912) on the installed reducer fitting.
5.
Connect the straight end of the installed hydraulic hose to the fitting installed in Port P of the SmarTrax
6.
valve (P/N 334-0003-089).

Install the Tank Hose

Disconnect the machine's tank hose from the tank port of the steering orbital.
1.
Tank Hose Installed
FIGURE 6.
Install a -12 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-029) on the open tank port on the
2.
steering orbital.
Connect the machine's tank hose to the opposite end of the installed tee fitting.
3.
Install a -12 JIC (F) to -8 JIC (M) reducer adapter fitting (P/N 333-0012-063) on the 90° end of the installed
4.
tee fitting.
Manual No. 016-5031-001 Rev. C
Hydraulic System Installation
13