Table of Contents
Advertisement
48
48
6
6
.4
.4
W
W
No Wireless Connectivity
No Wireless Connectivity
Try the following:
Try the following:
Change the wireless
Change the wireless channel
Make sure that the wireless client is configured for the correct wireless settings (Network Name, security
Make sure that the wireless client is configured for the correct wireless settings (Network Name, security
settings).
settings).
Check the signal strength, indicated by the wireless client manager
Check the signal strength, indicated by the wireless
the Thomson Gateway or directing the Thomson Gateway's antenna(s) for optimal performance.
the Thomson Gateway or
Make sure that the wireless c
Make sure that the wireless client adapter is enabled (message like "radio on").
Poor Wireless Connectivity or Range
Poor Wireless Connectivity or Range
Try the following:
Try the following:
Change the wireless channel
Change the wireless
Check the signal strength, indicated by the wireless
Check the signal strength, indicated by the wireless client manager
Thomson Gateway or to direct the Thomson Gateway's antenna(s) for optimal performance.
Thomson Gateway or to
Use WPA(2)-PSK as encryption.
Use WPA(2)-PSK as encryption.
For more information, see "3.3
For more information, see
Change the wireless channel
Change the wireless channel
Proceed as follows:
Proceed as follows:
1
1
Browse to the Thomson Gateway GUI
Browse to the
2
2
On the left menu, click
On the left menu, click Home Network
3
3
Under
Under Wireless
4
4
The
The Wireless Access Point
Wireless Access Point page appears.
5
5
In the Navigation bar
In the
6
6
Under Configuration
Under
7
7
Click Apply
Click
Can not connect via WPS
Can not connect via WPS
If you are having trouble connecting your wireless client via WPS, try to configure it manually. For more
If you are having trouble connecting your wireless
information, see "3.2
information, see
ir irel eles ess Co
s
Conn
nnec
ecti tion T
channel. .
directing the Thomson Gateway's antenna(s) for optimal performance.
lient adapter is enabled (message like "radio on").
channel. .
direct the Thomson Gateway's antenna(s) for optimal performance.
"3.3
Secur
Securing Y
Thomson Gateway
Home Network . .
Wireless , click your access point.
, click your access point.
Y Y our access point
our access point will be listed
will be listed in the following format: "WLAN:<Network Name> (<Actual
Speed>)". For example, WLAN: Thomson83C7C7 (54Mbps)
Speed>)". For example,
page appears.
Navigation
bar, click
, click Configure
Configure . .
Configuration , select the channel of your choice in the
, select the channel of your choice in the Channel Selection
Apply . .
"3.2
Connecting Y
Connecting
Your Wireless
our Wireless
on
Tro roub
uble lesh shoo
oot
t
client manager. If the signal is
client manager. If the signal is
ing
Your Wirele
our
Wireless Connec
ss
Connection" on page
GUI. .
in the following format: "WLAN:<Network Name> (<Actual
WLAN: Thomson83C7C7 (54Mbps) . .
client via WPS, try to configure it manually. For more
Client
Client witho
without WPS"
ut WPS"
E-DOC-C
E-DOC-CTC-20090
6
6
Troubleshooting
Troubleshooting
in ing
g
. If the signal is low, try repositioning
low, try repositioning
. If the signal is low, try to place the
low, try to place the
tion" on page
27. .
27
Channel Selection list.
list.
on page
on page
26
26. .
TC-20090708-0001
708-0001
v1.0
v1.0
Hide quick links:
Advertisement
Table of Contents
