THOMSON TG585 v8 Setup And User Manual page 18

1 1 Installation Installation
1. 1.4 4 Conn Co
Requirements Requirements
Both your computer and Thomson Gateway must have a free Ethernet port. Both your computer and Thomson Gateway must have a free Ethernet port.
 
  Y Y our computer must be our computer must be configured to obtain an
Ethernet cable Ethernet cable
In your package, you will In your package, you will find a cable with yellow connectors. This
Procedure Procedure
Proceed as follows: Proceed as follows:
1 1 Connect one end of the Ethernet cable to Connect one end of the Ethernet cable to one of the
2 2 Connect the other end of the Ethernet cable Connect the other end
3 3 Y Y our computer is now our computer is now connected to your network. No
12 12
nnec ecti ting ng a a C Com ompu
configured to obtain an IP address automatically. This is
find a cable with yellow connectors. This is the Ethernet cable.
of the Ethernet cable to your computer.
connected to your network. No additional configuration is needed.
pute ter U r Usi sing ng th the E e
IP address automatically. This is the default setting.
one of the yellow yellow Ethernet ports of your Thomson Gateway: Ethernet ports of your Thomson Gateway:
to your computer.
additional configuration is needed.
Eth ther erne net C t Cab able le
the default setting.
is the Ethernet cable.
E-DOC-CTC-20090 E-DOC-C TC-20090708-0001 708-0001 v1.0 v1.0