The WPS button LED is blinking red
The WPS button LED is blinking red
This indicates that the Thomson Gateway could not find your wireless client. Make sure that the WPS button
This indicates that the Thomson Gateway could not find your
LED is blinking orange when you start WPS on your wireless client.
LED is blinking orange when you start
Troubleshooting
Troubleshooting
If you are having trouble connecting your wireless client via WPS, try to configure it manually. For more
If you are having trouble connecting your wireless
information, see "3.2
information, see
E-DOC-CTC-2009
E-DOC-
CTC-20090708-000
0708-0001
WPS on your wireless client.
"3.2
Connecting
Connecting Y
Your Wireless
our Wireless
1
v1.0
v1.0
wireless client. Make sure that the WPS button
client via WPS, try to configure it manually. For more
Client
Client witho
without WPS"
ut WPS"
on page
on page
3
3
Wireless Access
Wireless Access
26. .
26
25
25