Safety Signs To Be Placed Near The Machine Area - Electrolux 6 GN 1/1 User Manual

Residual risk
Falling from above
Tipping of loads
Mechanical safety characteristics, hazards
• The appliance does not have sharp edges or protruding parts. The guards for the moving
and live parts are fixed to the cabinet with screws, to prevent accidental access.
CAUTION
In case of a significant anomaly (e. g. short circuits, wires coming out of the
terminal block, motor breakdowns, worn electrical cable sheathing, smell of gas
indicating possible leakage, etc.) the operator must:
immediately deactivate the machine.
A.5

Safety signs to be placed near the machine area

Prohibition
Danger
CAUTION - HOT
ATTENTION - CHAUD
End of use
• When the appliance is no longer to be used, make it unusable by removing the mains
power supply wiring.
8
Description of hazardous situation
The operator intervenes on the machine using
unsuitable systems to access the upper part ( e.g.
rung ladders or climbs on it)
When handling the machine or the packing
containing it, using unsuitable lifting systems or
accessories or with the unbalanced load
Meaning
Do not remove the safety devices
Do not use water to extinguish fires (placed on electrical
parts)
Keep the area around the appliance clear and free from
combustible materials. Do not keep flammable materials in
the vicinity of the appliance
Install the appliance in a well-ventilated place to avoid the
creation of dangerous mixtures of unburnt gases in the same
room
Meaning
Danger of burning – Hot surface
Danger of electrocution (shown on electrical parts with
indication of voltage)