Electrolux 6 GN 1/1 User Manual page 18

3. Press the Start button
Time option
CONTINUOUS COOKING
The cooking time is endless.
1. Press the endless button
The time display shows "cont".
2. Press the START button
3. When the food is cooked keep pressed the START button
to stop the CONTINUOUS COOKING cycle.
Time option
FOOD PROBE
Adjustable PROBE to measure the product core temperature.
This function excludes the cooking time setting.
1. Press the PROBE button;
Set the core probe temperature on the numeric keypad (eg
55); the Time display shows the value entered.
NOTE!
The core probe allows accurate control of the
core temperature of the product being cooked.
It is possible to set the probe temperature from 10
to 290℃. When the set value is reached, the
oven stops automatically.
2. Close the oven door and press the START button
the probe cycle.
Wait until the Temperature display indicates the end of the
preheating phase. The message LOAD appears.
3. Open the door, insert the food into the cavity.
WARNING
Risk of burns. Always open the
door with caution when the
oven is hot.
4. Remove the core probe from its seat;
18
to reach the set temperature.
>.
to start cooking the food.
to start
5. Insert it in the product without forcing excessively;
Make sure the tip - the sensitive part – is positioned near
the centre of the product.
G
H
I
IMPORTANT
The core probe is a precision component. Absolutely
avoid impacts, forcing when inserting, and pulling of
the flexible cable (in particular when using the trolley-
mounted structures).
The warranty does not cover the replacement of core
probes damaged by improper use.
The oven is equipped with a MULTIPOINT core probe with 6
sensors along the entire stem, for correctly measuring the
J
product core temperature even if the tip is not completely in the
centre.
6. Close the oven door.
The PROBE CYCLE keeps running.
End Probe cycle
• When the required product core temperature is reached the
oven stops automatically. The Time display shows the
duration of cooking cycle;
Probe cycle deactivation
• To deactivate the PROBE cycle simply press the TIME button
and set a cooking time. This action automatically cuts out
the core probe and viceversa. When the oven is switched off
the core probe option is also deactivated.
NOTE!
With vacuum packed food products it is necessary to
use the special external core probe (accessory
available on request), to be connected to the USB
pendrive. For its use, see the instructions included
with the accessory.
MULTIPHASE
Food can be cooked using different phases. The oven allows to
set up to 4 phases for each cycle.
During a multiphase cooking cycle the oven switches automati-
cally from one phase to the next one. The cycle stops when all
phases are completed.
To set a multiphase cycle:
1. Set first a cooking cycle (refer to F.4 Cooking cycle setting
paragraph);