Getting Started; Unpack The Equipment; Inspect The Equipment; Inventory The Equipment - Simplex 4190 Installation Instruction

Getting Started

Unpack the Equipment

Inspect the Equipment

Inventory the Equipment

Related Documentation

When you receive the equipment, immediately inspect the packaging for any
signs of shipping damage. If there are any signs of shipping damage file a claim
with the carrier and notify your local Simplex product supplier.
If there are no signs of shipping damage to the packaging proceed with
unpacking the equipment. Remove all protective plastic covering, Styrofoam
packaging material, and any other packaging material that may have been used.
After the equipment is unpacked, inspect it for damage. Look for cracked cases,
shattered CRTs, etc. If the equipment appears to be damaged, notify your local
Simplex product supplier; do not proceed with the equipment installation.
After the equipment is unpacked, locate the shipping papers that came with the
equipment and inventory the equipment received. If equipment is missing,
notify your local Simplex product supplier. If you received all the equipment
listed on the shipping papers, proceed with the hardware installation.
The following is a list of additional documentation that may assist you in the
installation.
•
4120 Information Management System (IMS) Operating Instructions
•
4100 Field Wiring Diagram............................................................ 841-438
•
4100/4120 Interconnect Diagram ................................................... 841-869
•
4190 IMS Field Wiring.................................................................... 842-435
1-2
...... 579-410