Hints On Disposal; Declaration Of Conformity - Klarstein 10029429 Manual

Problem
Device does not work,
ICE FULL light comes
on.
Device does not work,
ICE FULL and FAULT
flash together.
Device does not work,
FAULT light flashes.
WATER LOW and ICE
FULL flash together
or the FAULT flash
rapidly.
FAULT, WATER LOW,
ICE FULL three lights
flash slowly.
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailed information about recycling of this product, please contact your local council or your
household waste disposal service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
2009/643/EU (ErP)
9
Possible Cause
Ice full occur.
Ambient temperature is
below 6°C.
ICE FULL sensor is de-
maged or not connected.
Condenser sensor dema-
ged or does not run.
Refrigerant leakage.
Compressor does not
run.
Ambient temoperature is
below 6°C.
The hall sensor is not
in correct position or
damaged.
Paddle motor damaged.

Hints on Disposal

Declaration of Conformity

Solution
Remove th ice cubes from basket.
Keep the ambient temperature above 7°C, then restart
the unit.
Contact a service agency for repair or replacement.
Contact a service agency for repair or replacement.
Contact a service agency for check or replacement.
Compressor demaged or ambient temperature is above
43°C.
Keep the ambient temperature above 7°C, then restart
the unit.
Contact a service agency for adjustment or replace-
ment.
Contact a service agency for replacement.