Hints On Disposal - Klarstein Glacial Manual

EN
28
Fault Inspection
Less or thin ice Condenser
cubes
Filter
Water pump
Ambient
temperature
Air inlet

HINTS ON DISPOSAL

According to the European waste regulation 2012/19/
EU this symbol on the product or on its packaging indicates
that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product, please
contact your local council or your household waste disposal
service.
Cause Solution
Excessive fouling Clean the
of the condenser condenser.
results in poor
air intake, high
condensation
temperature, and
long ice making
time
The filter is Clean or replace
clogged, causing the filter.
poor water flow.
Pump failure Replace the water
caused poor pump.
water flow.
Ambient Place the machine
temperature is too in a room with
high. an appropriate
temperature.
Poor air pressure Keep a distance
leads to high of at least 15 cm
condensation to the left and
temperatures and right sides and the
long ice making rear.
times.