MSI Optix Series Manual page 27

1st Level Menu 2nd/3rd Level Menu
FreeSync
Premium
h Professional
1st Level Menu 2nd/3rd Level Menu Description
Pro Mode User
Reader
Cinema
Designer
sRGB
■ Use Up or Down Button to select and preview mode effects.
■ Press the Middle Button to confirm and apply your mode type.
Eye Saver
Low Blue Light*
* Due to using the monitor for expanded periods of time may cause eyes strain, also pain in part
of the body such as neck, arm, elbow, shoulder and back� To reduce for eyes strain, neck, arm,
elbow, shoulder and back pain from using the monitor for the expanded periods of time, please
take care below suggest:
1� Set the screen distance of the monitor between 20 inches to 28 inches (50 cm to 70 cm) from
your eyes�
2� Wink appropriately will helpful to reduce eyes strain after long time usage of the monitor�
3� Take breaks for 20 minutes every two hours�
4� Look away from monitor and gaze at a distant object for at least 20 seconds during the
breaks�
5� Make stretches to relieve in the neck , arm , back and shoulders during the breaks�
6� Using the reader mode or turn on this item that will decrease effects of blue light emission
damage to the eyes , and this item is compliance with TUV Low Blue Light Certification.
Description
■ For PAG272QR, PAG272QR2, and
(OFF)
■ FreeSync Premium prevents screen tearing�
(ON)
■ DisplayPort or HDMI default is ON and can
■ Anti Motion Blur will be disabled, if FreeSync
Default mode� All items can be adjusted by users�
All items can be adjusted by users�
All items can be adjusted by users�
All items can be adjusted by users�
All items can be adjusted by users�
■ For PAG272QR�
(OFF)
■ Eye Saver protects your eyes against blue light�
When enabled, Eye Saver adjusts the screen color
(ON)
temperature to a more yellow glow�
■ Users can adjust Eye Saver in any Mode�
■ When Pro Mode is set to Reader, it is mandatory
to enable Eye Saver�
PAG272R�
be adjusted ON/OFF in any mode, any
resolution, any input source and any screen
refresh rate�
Premium is enabled�
OSD Setup
2-7